Record-cleaning machine

Nessie Vinylmaster®

 
Plattenwaschmaschine Nessie Vinylmaster
Integrierter Reinigungsmitteltank
Integrated cleaning
agent tank

The record cleaner is filled into the cleaning agent tank from above with the help of the Nessie funnel. The cleaning agent in the tank is sufficient for 100 LP cleaning cycles at least. The tank is made of PVC, the tank cover of polished stainless steel.

We recommend using Nessie Vinylin. It is a first-class vinyl cleaner that is matched to the record-cleaning machine. Click here to display a list of suitable record cleaners available on the market.

Exakte Reinigerdosierung
     Accurate cleaner
    dosage

The machine ensures that an appropriate quantity of record-cleaning agent is applied to the record. There is no risk of applying too much or too few cleaning agent. Of course, you can apply more agent manually in particular cases. Just press the operating button to do this. Even though the machine operates in automatic mode, individual manipulation is possible at any time.

Rillentiefe Reinigung mit Zwillingsbürste
Twin brush
  for groove-deep
cleaning

The extremely soft nylon hairs of the two brushes have a diameter of 0.0075 mm and enter the upper part of the record groove without any problems. During the rotation of the turntable, thousands of superfine brush hairs run through the record grooves and loosen all dirt down to the groove bottom. The dirt particles are absorbed by the cleaning agent and can be extracted subsequently.

The record is cleaned over the entire grooved area by the Nessie twin brush. This is important because it ensures that the lead-in and lead-out grooves become clean as well.

Ergonomischer Puck mit Labelschutz
Ergonomic record
   clamp with
  label protection

A record clamp of solid aluminium is used to fix the record during the cleaning process on the turntable. The record clamp has an ergonomic design and is fitted with a rubber ring at the top of the handle to ensure a firm and secure grip. The shiny hard-chrome plating protects the record clamp against corrosion and turns it into a real eye-catcher on the appliance.

The label of your record is protected against moisture during the cleaning process. The bottom of the record clamp is fitted with a lip gasket that seals around label during cleaning.

Rillentiefe Reinigung mit Zwillingsbürste
The Nessie extraction
      - low noise
     and gentle

When moving the drying arm over the record, extraction starts automatically. All loosened contamination is sucked off even from the bottom of the grooves. The spinning speed of the turntable is automatically reduced and the extraction power adjusted accordingly. A smooth velvet cushion protects the record surface during the extraction process. The vacuum pump is automatically turned off after the direction of rotation has been changed once. The drying process is optimally controlled and cannot be influenced by the user.

By the way, Nessie will not upset your neighbours because the extraction system is low noise thanks to consequent insulation with Basotec® acoustic foam.

„Single Touch“ Bedienung“ auf der Arbeitsplatte
One Touch
    operating button
   on the worktop

You will hardly believe it but the machine can be operated with a single push-button. Sensors in the brush and extraction arms provide for automatic control. This makes the manipulation of the appliance really easy. You need not crane your neck to find the appropriate operating button.

Waschtimer für optimale Waschdauer
Acoustical Cleaning timer
for cycle
optimisation

The cleaning time is measured by the electronic control system with the help of a timer. The timer signals acoustically when the record is clean. The end of the cleaning cycle is also indicated by the LED integrated in the push button. The best cleaning time was determined experimentally in several thousand cleaning cycles. The Nessie cleaning timer ensures perfect cleaning while preventing your records from wear and tear to the greatest possible extent. If you want to clean a record shorter or longer, you can do this of course.

A Integrated cleaning agent tank

The record cleaner is filled into the cleaning agent tank from above with the help of the Nessie funnel. The cleaning agent in the tank is sufficient for 100 LP cleaning cycles at least. The tank is made of PVC, the tank cover of polished stainless steel. We recommend using Nessie Vinylin. It is a first-class vinyl cleaner that is matched to the record-cleaning machine. Click here to display a list of suitable record cleaners available on the market.

B Accurate cleaner dosage

The machine ensures that an appropriate quantity of record-cleaning agent is applied to the record. There is no risk of applying too much or too few cleaning agent. Of course, you can apply more agent manually in particular cases. Just press the operating button to do this. Even though the machine operates in automatic mode, individual manipulation is possible at any time.

C Twin brush for groove-deep cleaning

The extremely soft nylon hairs of the two brushes have a diameter of 0.0075 mm and enter the upper part of the record groove without any problems. During the rotation of the turntable, thousands of superfine brush hairs run through the record grooves and loosen all dirt down to the groove bottom. The dirt particles are absorbed by the cleaning agent and can be extracted subsequently.

The record is cleaned over the entire grooved area by the Nessie twin brush. This is important because it ensures that the lead-in and lead-out grooves become clean as well.

D Ergonomic record clamp with label protection

A record clamp of solid aluminium is used to fix the record during the cleaning process on the turntable. The record clamp has an ergonomic design and is fitted with a rubber ring at the top of the handle to ensure a firm and secure grip. The shiny hard-chrome plating protects the record clamp against corrosion and turns it into a real eye-catcher on the appliance.

The label of your record is protected against moisture during the cleaning process. The bottom of the record clamp is fitted with a lip gasket that seals around label during cleaning.

E The Nessie extraction - low noise and gentle

When moving the drying arm over the record, extraction starts automatically. All loosened contamination is sucked off even from the bottom of the grooves. The spinning speed of the turntable is automatically reduced and the extraction power adjusted accordingly. A smooth velvet cushion protects the record surface during the extraction process. The vacuum pump is automatically turned off after the direction of rotation has been changed once. The drying process is optimally controlled and cannot be influenced by the user.

By the way, Nessie will not upset your neighbours because the extraction system is low noise thanks
to consequent insulation with Basotec® acoustic foam.

F One Touch operating button on the worktop

You will hardly believe it but the machine can be operated with a single push-button. Sensors in the brush and extraction arms provide for automatic control. This makes the manipulation of the appliance really easy. You need not crane your neck to find the appropriate operating button.

G NEW! Acoustical Cleaning timer for cycle optimisation

The cleaning time is measured by the electronic control system with the help of a timer. The timer signals acoustically when the record is clean. The end of the cleaning cycle is also indicated by the LED integrated in the push button. The best cleaning time was determined experimentally in several thousand cleaning cycles. The Nessie cleaning timer ensures perfect cleaning while preventing your records from wear and tear to the greatest possible extent. If you want to clean a record shorter or longer, you can do this of course.

Plattenwaschmaschine Nessie Vinylmaster
Automatic
  adjustment
 to warps

No record is perfectly plane. The two brush elements of the Nessie twin brush are therefore suspended individually. They adjust to warps up to 2 mm in height automatically.

Dynamic cleaning
    due to changes
    in the direction
of rotation

The spinning direction of the turntable alternates every two rotations automatically. This provides for dynamic cleaning because all brush hairs are realigned after each change. Thanks to the electronically controlled soft start-up, the change of direction is free from jerks and smooth.

Intensiv-Waschprogramm

Sometimes, it may be necessary to clean a record very profoundly. The intensive cleaning programme of Nessie Vinylmaster® provides a cleaning cycle of 20 minutes for this task. During the intensive cycle, liquid is automatically reapplied as required. This ensures that even severely contaminated records become clean down to the grooves again.

Press the start button for three seconds to activate the intensive cleaning programme.

H Automatic adjustment to warps

No record is perfectly plane. The two brush elements of the Nessie twin brush are therefore suspended individually. They adjust to warps up to 2 mm in height automatically.

J Dynamic cleaning due to changes in the direction of rotation

The spinning direction of the turntable alternates every two rotations automatically. This provides for dynamic cleaning because all brush hairs are realigned after each change. Thanks to the electronically controlled soft start-up, the change of direction is free from jerks and smooth.

k NEW! Intensive cleaning programme

Sometimes, it may be necessary to clean a record very profoundly. The intensive cleaning programme of Nessie Vinylmaster® provides a cleaning cycle of 20 minutes for this task. During the intensive cycle, liquid is automatically reapplied as required. This ensures that even severely contaminated records become clean down to the grooves again.

Press the start button for three seconds to activate the intensive cleaning programme.

Technical Data

Dimensions (L x W x D)400mm x 330mm x 170mm
Weight9 kg
Voltage230V/50Hz
Wattage in cleaning mode8 Watt
Wattage in extraction mode255 Watt
Protection Classes1, IP40
Declaration of ConformityCE
Cleaning agent tank capacity525 ml
Waste water tank capacity450 ml

Nessie Vinylin
First Class Record Cleaner for your Vinyl

Nessie Vinylin is a deep-action cleaning agent for all electric record-cleaning machines- Powerful against dirt – extremly gentle to your records. Nessie Vinylin is a ready for use product, no mixing is necessary. One 500 ml bootle is suitable for approx. 100 LP-records.

Nessie Vinylin® is perfectly matched to the Nessie Vinylmaster® record-cleaning machine, but also a upgrade for other Record Cleaning Machines. Nessie Vinylin® removes contaminations quickly and bonds them with so-called complexing agents. The record is cleaned down to the bottom of the grooves and the shiny black surface is restored.
The cleaning agent is free from aggressive substances and 100 % compatible to the surface of records. Nessie Vinylin® is not hazardous in the sense of the currently applicable EC directive and requires no special declaration.

DRAABE article No.: 80200

Brushes

The two very soft brushes have a long duration of life (approx. 1000 Cleaning cycles). The spare brushes are selected, burred and equipped with a 3,1 mmm hole in the center.

material: PA 0,075, two lines
active length: 99 mm

DRAABE article No.: 80600

Velvet Lips

The two very soft brushes have a long duration of life (approx. 1000 Cleaning cycles). The spare brushes are selected, burred and equipped with a 3,1 mmm hole in the center.

DRAABE article No.: 80500

The mat

The antistatic platter mat is made from polymerfoam and has an antistatic effect. Dust and particles stick on the pores of the surfaces, so that dirt will not be carried from one side to the other. The mat is easily cleaned by vacuum cleaner. It should be replaced after a few years of use.

DRAABE article No.: 80700

The Cloth

This cloth is a very helpful tool for cleaning records. The cloth is made from hightec microfibre and is recommended from us for pre-cleaning.

DRAABE article No.: 80400

Singleset
Single set for the cleaning of 7-inch singles; consisting of:

  • a 90-mm high gloss chromium plated record clamp with seal,
  • a mat suitable for singles,
  • a special extraction arm for singles,
  • a brush for singles and
  • a cleaner-dosage bottle for maual dosage.


DRAABE Artikelnummer: 80800

Dustcover

The beautiful Nessie Acrylic Dustcover protects the surface of the machine against dust and damage. The cover is crafted from clear acryl. Openings guarantee exchange of moist and protect against mold.

Size: 410 x 340 X 85 mm

DRAABE article No.: 80300

Nessie Vinycleaner PRO

The record cleaning machine "Nessie Vinylcleaner PRO" is based on the model "Nessie Vinylcleaner". In the heart, however, beats much of the technique of the big brother, the "Nessie Vinylmaster".


The brush arm, that makes record cleaning easy
A brush arm is mounted on the front right of the machine. This brush arm makes record cleaning much easier. He is simply swivelled to the record. The brush is swinging suspended and therefor automatically adapts to unevenness of the record surface. The record is thoroughly cleaned across the entire width without having to hold a hand brush.
The brush consists of finest polyamide carbon fibers of the highest quality from a German brush factory. The in-house cleaner “Nessie Vinylin" comes in a handy 200 ml spray bottle, which makes it easy to apply the cleaning solution to the record.

Vinyl Cleaner Pro   Vinyl Cleaner Pro   Vinyl Cleaner Pro

The well-known Nessie suction - silent and residue-free
In the Nessie Vinyl Cleaner Pro the suction turbine of the Nessie Vinylmaster incl. electronics is installed. When the drying arm is pivoted onto the plate, the suction starts and all dissolved impurities are drawn out of the groove. The extraction ends automatically after 1 revolution. The usual in many cleaners "residual strip" is not in the Nessie Vinyl Cleaner Pro.
The sound insulation is completely executed in Basotect. Due to the electronic regulation of the suction turbine and the sound insulation, the device is extremely quiet.

Wash-Timer with LED display
The start button is located on the front of the device and is equipped with a blue LED. If the start button is pressed, an electronic timer runs and measures the washing time. After the minimum washing time, the LED flashes and the suction process is released. Of course, the user can continue washing. The timer is a helpful orientation, especially if you wash several records in a row.

Equipped for all record formats
The standard delivery includes 7 inch (single) and 10 inch records. Expensive additional purchases are no longer required.

Dynamic washing by automatic change of direction
The direction of rotation of the turntable changes automatically. This creates a dynamic washing operation.

Protection against electrostatics
The Nessie Vinylcleaner Pro is repeatedly protected against electrostatic charges, i.a. by grounding the plate mandrel and the metal supports as well as an antistatic mat.

High quality
The device is manufactured in qualified manufacturing work in Germany. The case is made of raven-black 8 mm high-gloss acrylic, the turntable made of satin acrylic "snow". The high-quality look of the Nessie Vinylcleaner Pro is underlined by elegant chrome and stainless steel elements.
Also unique in this class is the noble puck made of hard chrome-plated aluminium. It has a lip seal at the bottom made of rubber, which protects the label from moisture during washing. He is simply-without bothersome screw- put on the plate.

Scope of delivery
  • Nessie Vinylcleaner Pro
  • MMassive glossy plate weight with label protection seal
  • 3 pcs. Anti-static mats for 12, 10 and 7 inch vinyl records
  • Extraction arm for 12.10 and 7 inch records
  • Brush arm with easy swivel feature
  • Operating Instructions (English)
  • Power cord
  • microfiber cloth
  • records brush
  • funnel

Technical specifications

Item number87100
Dimensions (L x W x H)300 x 330x 250mm
Weight without packaging7 kg
Weight with packaging9 kg
Tank capacity suction450 ml
Speed turntable30 rpm.
Protection class1
Input Voltage230V 50Hz or 100-110 V 50/60 Hz.
Power consumption "washing mode"18 Watt
Power consumption "suction"175 Watt
Power consumption "stand-by"< 1 Watt
Permissible ambient temperature5 - 40 °C
declaration of conformityCE